How-to take great panoramic photos
There’s nothing like a panoramic photo to capture beautiful scenery (unless you count actually being there, of course). I’ve been taking panoramic pictures for a couple of years now and I thought I would share them with you, as well as some tips.
Here’s the first panorama I took, from the bank of the River Thames in Wallingford (UK).
I was fairly happy with it, for a first attempt. I used the Canon Photostitch software which came free with my Canon 350D camera. It’s done a fair job of stitching the photos together, but there’s some noticeable lines where the joins have been made. Also, I let the camera take care of the exposure setting, so the sky changes colour across the scene.
I was a bit disappointed with the end result, so I did what everybody does when they want to learn how to do something - I Googled it. I got some useful tips:
Turn Auto-exposure OFF Turn Auto White Balance OFF Turn the Flash OFF Use one Focal Length for all shots in the sequence (manual focus, not AF) Use one Size/Quality for all shots in the sequence Use a tripod whenever possible – especially when objects are near to the camera If a tripod is not available, lock elbows and pivot on one spot – keep camera level. Use 25%-50% overlap for each shot Use reference points on the landscape when moving the camera. Go beyond 360 degrees when shooting for 360 degrees panoramas – mark your tripod with a piece of tape Create time-based groups – wait no more than 40 seconds between shots Insert visual dividers (black shots, or a shot of the ground / your hand) between sequences Be aware that an object in motion may cause problems when stitching Be aware that scenes without much detail (cloudless sky over flat sea) are more difficult to stitch
Armed with this information, I was certain my next panoramic photos would be better.
In February this year, we had a holiday in New Zealand - one of the most scenic countries in the world. I was itching to try out the panoramic techniques I had learned and soon I found a couple of decent places to practice taking panoramic shots.
This one is of Gibson Quay in Hokitika:
After seeing the results, I discovered I needed to add another point to my checklist:
- DON’T use a polarising filter!
The variance in the sky was too great, but by stitching only some of the pics together, I got a better result (I used it right at the top of this page).
Also, to get the absolute best sized panorama:
- Take portrait (tall) shots
I also ditched the Canon software in favour of Arcsoft Panorama Maker. The Arcsoft product not only had a better UI, I think the results speak for themselves. There’s another (free) piece of software which seems to be particularly good at panormamas - AutoStitch. It also works with more than 16 pictures and intelligently stitches together pictures, they don’t have to be sequential. Here’s AutoStitch in action, on some pictures I took overlooking Arthur’s Pass:
Incidentally, I also ditched the Canon Zoombrowser software and started using Picasa to organise my photos. To be honest, I was not impressed with any of the Canon software that came with my camera - it all seemed like it was written for Windows 3.1 and had the UI to match.
During the February trip, we were lucky enough to stay at a friend’s bach (holiday home) which had a fantastic view of Lake Brunner. I got up early and took lots of shots. (Too many in fact, the Arcsoft software has a maximum of 16 per panorama). Anyway, this is the result:

Much better!
There’s still a bit of banding visible, but it’s still a cracking shot.
We liked New Zealand so much, we decided to move there, so in April we came out for good!
Just recently, after things had settled down a bit, we went away for the weekend and I took a couple more panoramas. This one was taken from the side of the road:
It’s a nice shot, but the ‘jagginess’ of the straight lines on the road is a little off. Not much can be done about that, but it’s a lesson learned for me.
On the way back, we stopped at the top of a mountain and I took another one:
The two vehicles to the left of the shot are actually the same one, taken as he was parking. He appeared in two photos, which were then stitched together. (If you look at the large version, you can see the join if you look at the handrail). You can also see my shadow at the bottom of the shot, but I left it in because I actually quite like it being there.
When we got back home to Whitby, the weather was still great so I drove to the waterfront and took a panorama of the inlet:
I think that one is particularly good - I guess practice does make perfect.






July 20th, 2007 at 1:37 pm
Hey dude, great tips and photos!
July 21st, 2007 at 2:46 pm
You need a lot more practise. Some of your advise is meritorious. Take a look at mine. I have been doing them for three years. Although I have only posted 300 on my site, I have more than 500. I believe I am just now getting the hang of it.
I use a Nikon D200 and always use a tripod. You can use fully auto features, but bring them into photoshop to adjust exposure two frames at a time.
I use ArcSoft to stitch them together and the learning curve is a flat line.
Let me know your opinions.
Steve
July 21st, 2007 at 2:48 pm
My website was not included in the post so here it is for your viewer/readers.
http://www.panoramagraphs.com
I am selling mine from $35 to $3500 and it has been a long road travelled.
September 10th, 2007 at 3:16 pm
thank you for sharing your experience and advise, I am excited to try … Steve, you are not nice, you offer no advice, only want to sell, shame on you
September 27th, 2007 at 7:05 am
Very nice website you got. What is the software you use to stitch your photos. I am using Photoshop CS3.
February 25th, 2008 at 9:29 pm
Steve, you come across as pompous and your website needs a redesign.
Well, you did ask for comments
May 31st, 2008 at 10:15 am
Geeez! Lots of negative feedback.
Actually, I gave out my website, NOT to sell to anyone, but to GIVE advice. There is an entire page stating HOW I make my vistagraphs. Sorry for the oversight in not pointing that out.
Thanks again for your criticism Anita.
As my advice page states, I am using ArcSoft. I dont mind using photoshop to tie two shots together, but ArcSoft (.com) does it much better and quicker. I still have the original arcsoft program that came with my Nikon, but they have a newer version that is just as easy and costs about $35.
Good luck.